WirelesProf. Charity MannMicah Gaylords Remote Control SwiMrs. Margarette Reinger Jr.tch DC1Mrs. Mittie Schinner I2V 10A 43Dr. Roy Bechtelar I3MHz TLynn HeathcoteDesiree Flatleyransmitter with RElvera Littel IIeceiverEaston Rolfson

Wireless Remote Control Switch DC12V 10A 433MHz Transmitter with Receiver

Features:
100% new and high quality
Three output working modes for choosing
Safe and flexible for operation and install
Widely use in house, mall, electromobile, cars, motorcycle anti-theft alarm system or other control systems
Specified as preferred components in remote control garage, roller curtain, door locks, remote sensing, telemetry, industrial control and wireless security alarm industry

Specifications:
Operating voltage: DC 12V
Operating Current: ≤ 6mA
Operating frequency: 433MHz
Operating temperature: -40 to + 80
Receiver sensitivity: ≥-105dbm
Output voltage: DC
Output Current: ≤ 10A
Code: Learning code. (Jog/ Non-Locked, Inter-lock/ locked, Auto-lock / Auto-Locked)

Output working way:
Jog /Non-locked: Press a button is working/ on and loosen your finger on the same button is stop/ off. (A channel change needs a remote control button)
Auto-lock: Press one button for one time is working/ on and press the same button is stop/ off. (A channel change needs a remote control button)
Inter-lock / locked: Press a button is working/ on and press another button is stop/ off. (A channel change needs 2 remote control buttons)

Learning and removing method:
1. Learning method: Press the learning code for 3 seconds. The indicator will be off, and then loosen your finger, press any button of the remote control to transmit signal, the indicator flash 3 times and then normally on which means you learn it successfully.
2. Remove/clean method: Press the learning button about 8 seconds, the indicator will be from being off to on all the time, it means the information that you keep have been removed successfully.